Interior Trim Removal/Installation - Rear Shelf Area
Rear Shelf
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
  • Put on gloves to protect your hands.
  • Take care not to bend or scratch the rear shelf, rear bulkhead cover, and the trim.
  • When removing components, use the trim tools or equivalent.
  1. Remove these items:
    • Rear seat cushion
    • Rear seat side bolster, both sides
    • Rear door opening seal, as needed
    • Rear pillar trim, both sides
    • Rear center seat belt lower anchor
  1. Fold both the rear seat-backs forward.
  1. If both the rear bulkhead cover and the rear shelf are to be removed from the trunk compartment, turn the high mount brake light socket (A) 45 ° counterclockwise to remove the socket.