Interior Trim Removal/Installation - Pillar Areas
Front Pillar Trim
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
  • Follow the front pillar trim installation procedure carefully; improper installation could cause the side curtain airbags to deploy improperly and possibly cause injury.
  • Put on gloves to protect your hands.
  • When removing components, use the trim tools or equivalent.
  • Take care not to scratch the trim and the panels.
  • LHD model is shown; RHD model is symmetrical.
  • The upper clip in the front pillar trim (A) consists of a resin grommet (B) and a metal pin (C). The grommet expanded with the pin secures it to the body panel (D). The grommet must be replaced with a new one when the trim is reinstalled.