Dashboard Passenger's Trim Removal/Installation
NOTE:
  • Take care not to scratch the dashboard and its related parts.
  • When removing components, use the trim tools or equivalent.
  • LHD model is shown; RHD model is symmetrical.
  1. Remove the passenger's dashboard trim (A).
    -1.
    Open the glove box.
    -2.
    Pull out on the bottom edge of the trim by hand.
    -3.
    Detach the clips along the trim.
  1. Install the trim in the reverse order of removal, and note these items:
    • If the clips are damaged or stress-whitened, replace them with new ones.
    • Push the clips into place securely.