Dashboard Side Pocket Removal/Installation
NOTE:
  • Take care not to scratch the dashboard and its related parts.
  • LHD model is shown; RHD model is symmetrical.
  1. Remove these items:
    • Center console panel
    • Center console rear trim
    • Driver's center trim
    • Passenger's dashboard trim
    • Passenger's center trim
    • Center console
  1. Remove the screws, and pull out the side pocket (A) to detach the clip, then remove it. The driver's side pocket is shown; the passenger's side pocket is similar.
  1. Install the cover in the reverse order of removal, and note these items:
    • If the clips are damaged or stress-whitened, replace them with new ones.
    • Push the clips into place securely.