Dashboard Center Trim Removal/Installation
NOTE:
  • Take care not to scratch the trim and panels.
  • When removing components, use the trim tools or equivalent.
  • LHD model is shown; RHD model is symmetrical.
  1. Remove these items:
    • Center console panel
    • Passenger's side: Passenger's dashboard trim
  1. Remove the driver's center trim (A) or the passenger's center trim (B).
    -1.
    Remove the screw(s) (C).
    -2.
    Gently pull the lower portion of the trim up to detach the clip (D) and to release the hook (E) from the edge of the center console (F).
    -3.
    Pull out the trim to detach the clips (G, H).
  1. Install the trim in the reverse order of removal, and note these items:
    • If the clips are damaged or stress-whitened, replace them with new ones.
    • Push the clips into place securely.

Driver's side
Passenger's side