Dashboard Side Vent Removal/Installation
NOTE:
  • Take care not to scratch the dashboard and its related parts.
  • When removing components, use the trim tools or equivalent.
  • The driver's side vent on the LHD model is shown; the passenger's side vent on the LHD model is symmetrical; the dashboard side vents on the RHD model are similar.
  1. Driver's side: Open the front door, and remove the driver's dashboard side lid (A).
    -1.
    Pull the lower edge of the lid by hand to detach the lower clip (B).
    -2.
    Gently pull the rear edge of the lid outward by hand to detach the clips (C) and the hooks (D).
    -3.
    Release the hooks (E, F).
  1. Passenger's side: Open the glove box, then remove the passenger's dashboard side lid.