Center Console Panel Removal/Installation
  1. Install the console panel in the reverse order of removal, and note these items:
    • Make sure each connector is plugged in properly.
    • If the clips are damaged or stress-whitened, replace them with new ones.
    • Push the clips and the hook into place securely.
    • Type-S: Install the shift knob in numbered sequence.
      • -
      Turn the spacer (A) until spacer contacts with shaft (B).
      -
      Turn the shift knob (C) until shift knob contacts with spacer.
      -
      Tighten the spacer when the shift pattern turn to front of vehicle, by turning back knob (amount of turning back: 360 ° MAX).