Carpet Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
  • Put on gloves to protect your hands.
  • Take care not to damage, wrinkle or twist the carpet.
  • Be careful not to damage the dashboard and other interior trim pieces.
  • When removing components, use the trim tools or equivalent.
  1. Remove the front seat mounting bolts.
  1. Do the battery terminal disconnection procedure, then wait at least 3 minutes before beginning work.
  1. Remove these items:
    • Front seats, both sides
    • Rear seat cushion
    • Front door sill trim, both sides
    • Rear door sill trim, both sides
    • Front door opening seal, as needed
    • Rear door opening seal, as needed
    • Kick panels, both sides
    • Center pillar lower trim
    • Driver's dashboard undercover
    • Passenger's dashboard undercover, for some models
    • Center console panel
    • Center console rear trim
    • Driver's center trim
    • Passenger's dashboard trim
    • Passenger's center trim
    • Center console
    • Rear ventilation ducts, both sides, for some models
    • Steering joint cover
    • Parking brake lever
    • Driver's dashboard center lower cover
    • Passenger's dashboard center lower cover
    • M/T model: Shift lever bracket
    • A/T model: Shift lever
  1. Remove the front passenger's seat belt lower anchor bolt.
  1. Release the hooks (A), then remove the accelerator pedal clip (B).