Trunk Lid Torsion Bar Replacement
  1. Install the torsion bars in the reverse order of removal, and note these items:
    • The shapes of the right torsion bar (A) and the left torsion bar (B) are shown. Install the torsion bars properly.
    • Adjust the torsion bars forward or rearward with the torsion bar assembly tool.
    • Positions where each torsion bar was installed in the factory are following:
      • -
      Left torsion bar: Normal position
      -
      Right torsion bar: Normal position
    • Make sure the trunk lid opens properly and locks securely.