Cowl Cover Replacement
NOTE:
  • Put on gloves to protect your hands.
  • When removing components, use the trim tools or equivalent.
  • Take care not to damage the body.
  • LHD model is shown; RHD model is symmetrical, except the tubing of the washer tube.
  1. Remove these items:
    • Windshield wiper arms
    • Front grille cover
    • Front fender trim, both sides for some models
  1. Remove the cowl cover (A).
    -1.
    Remove the clips (B).
    -2.
    Disconnect the washer tube (C).
    -3.
    Detach the clips (D, E, F) by carefully pulling the cover up.
    -4.
    Release two front hooks (G) from the body.
    -5.
    Release the hood hinge covers (H) from both hood hinges (I).
  1. Install the covers in the reverse order of removal, and note these items:
    • If the clips are damaged or stress-whitened, replace them with new ones.
    • Push the clips into place securely.
    • Make sure the hood hinge covers are seated on the cowl cover securely.
    • Make sure the washer tube is connected properly.