Audio Unit Removal/Installation - Without NAV.
Without Navigation System
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before doing repairs or service.
NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the dashboard and related parts.
  • Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.
  • Eject all the disc before remove the audio unit to prevent damaging the CD/DVD player's load mechanism.
  • If you are replacing the audio unit, write down the audio presets (if possible), then enter them into the new audio unit.
  1. Remove these items:
    • Driver's center trim
    • Passenger's dashboard trim
    • Passenger's center trim
    • Center console panel
    • Climate control unit
    • Dashboard center pocket
  1. Make sure you have the anti-theft codes for the audio system.
  1. Remove the bolts, then pull out the audio unit (A).
  1. Disconnect the connectors (B), then remove the audio unit.
  1. Remove the dashboard center vent.