Audio System Self-diagnostic Function
Communication Connection Check Mode
NOTE:
  • Not all self-diagnostic functions appear on all models.
  • There may be other self-diagnostic functions that are for factory use only.
  1. Turn the ignition switch to ON (II). Turn the audio unit off.
  1. Push and hold the No. 1 and No. 6 buttons. While holding the buttons, push the VOL knob to on. Release the buttons.
  1. Press the No. 6 button, and the communication connection check mode begins.
  1. Each time you press the No. 6 button, the communication connection state is displayed in the following order.
    NOTE: If the switch panel display or the center display is blank in all headlight positions, or blank only when the headlights are tuned on, check for B-CAN DTCs.

    Display Specifications (With navigation system)

    Displayed Segments
    State
    Remarks
    DSP OK
    The audio-HVAC subdisplay unit or the audio-HVAC display unit is connected.
    DSP NG
    The audio-HVAC subdisplay unit or the audio-HVAC display unit is not connected.
    AC OK
    The climate control unit is connected.
    AC NG
    The climate control unit is not connected.
    AMP OK 00
    The stereo amplifier is connected.
    Applicable to the premium audio system
    AMP OK 04
    The stereo amplifier is connected (Error has occurred four times in the past).
    Applicable to the premium audio system
    AMP NG
    The stereo amplifier is not connected.
    Applicable to the premium audio system


    Display Specifications (Without navigation system)

    Displayed Segments
    State
    Remarks
    02 183
    The navigation unit is not connected.
    ANT ———
    The antenna amplifier is connected.
    ANT CHK
    The antenna amplifier is not connected.
    AMP ———
    The stereo amplifier is connected.
    Applicable to the premium audio system.
    AMP CHK
    The stereo amplifier is not connected.
    Applicable to the premium audio system.
    AMP 0100
    The stereo amplifier is connected.
    Applicable to the premium audio system.
    AMP NG 04
    The stereo amplifier is not connected (error has occurred four times in the past).
    Applicable to the premium audio system.
    AC OK
    The climate control unit is connected.
    AC NG
    The climate control unit is not connected.
    CMP OK
    The electrical compass unit is connected.
    Applicable to the premium audio system.
    CMP NG
    The electrical compass unit is not connected.
    Applicable to the premium audio system.
    LCD 0100
    The audio-HVAC display unit is connected.
    LCD NG
    The audio-HVAC display unit is not connected.

    NOTE: Any other diagnostic screens are shown for the manufacturer's purpose only.

  1. The self-diagnostic function ends when you turn the audio unit off or turn the ignition switch to LOCK (0).