Audio System Symptom Troubleshooting - No sound is heard from the speaker(s) (display is normal) (with premium audio system)

  1. Check for continuity between stereo amplifier connector B (18P) according to the table.
    Speaker
    Stereo amplifier terminal
    Wire color
    Left front door speaker, Left front tweeter
    A16 (+)
    BLK
    A7 (−)
    BLU
    Right front door speaker, Right front tweeter
    A15 (+)
    RED
    A6 (−)
    GRN
    Left rear door speaker
    A13 (+)
    WHT
    A4 (−)
    GRN
    Right rear door speaker
    A12 (+)
    RED
    A3 (−)
    BLU
    Front center speaker
    A11 (+)
    YEL
    A2 (−)
    BLU
    Subwoofer
    A10 (+)
    GRY
    A1 (−)
    LT BLU
    Left rear speaker
    A17 (+)
    YEL
    A8 (−)
    BRN
    Right rear speaker
    A14 (+)
    BLU [PNK]
    A5 (−)
    ORN [BRN]

    [ ]:
    RHD model

Is there continuity?
YES -
Go to Step 14 .
NO -
Repair open in the wire between the stereo amplifier and the speaker or door speaker network control unit.■
  1. Disconnect the jumper wire.