Driveshaft Dynamic Damper Replacement
  1. Adjust the specified distance (A) between the outboard joint side and the dynamic damper edge.
    NOTE: Check the type of dynamic damper at its shape.
Model
Left/Right Driveshaft
Dynamic Damper Type
Specified Distance (A)
R20A3 engine model
M/T
Left
2
295.5−300.5 mm (11.63−11.83 in.)
Right
1
A/T
Left
1
295.5−300.5 mm (11.63−11.83 in.)
Right
1
K24Z3 engine model
M/T
Left
2
295.5−300.5 mm (11.63−11.83 in.)
Right
1
A/T
Left
1
298.5−303.5 mm (11.75−11.95 in.)
Right
2
292.5−297.5 mm (11.52−11.71 in.)

  1. Install the dynamic damper band.
  1. Install the inboard joint.

Dynamic damper type 1
Dynamic damper type 2