Driveshaft Dynamic Damper Replacement
  1. Remove the inboard joint.
  1. Remove the dynamic damper band.
  1. Remove the dynamic damper (A).
  1. Install the new dynamic damper.
    NOTE: Be careful not to swap the dynamic dampers. Check the type of dynamic damper at its shape.
    Model
    Left/Right Driveshaft
    Dynamic Damper (A) Type
    R20A3 engine model
    M/T
    Left
    2
    Right
    1
    A/T
    Left
    1
    Right
    1
    K24Z3 engine model
    M/T
    Left
    2
    Right
    1
    A/T
    Left
    1
    Right
    2


Dynamic damper type 1
Dynamic damper type 2