Brake Hose Replacement
NOTE:
  • Before reassembling, check that all parts are free of dirt and other foreign particles.
  • Replace parts with new ones whenever specified to do so.
  • Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid gets on the paint, wash it off immediately with water.
  • Plug the end of a hose and joints to prevent spilling brake fluid.
Front
NOTE: The illustrations show the 1-piston caliper type.
  1. Remove the front wheel.
  1. Disconnect the brake line (A) from the brake hose (B), then remove the brake hose clip (C).