Rear Brake Disc Replacement
Rear drum in disc brake type
NOTE: Keep any grease off the brake disc/drum and brake pads.
  1. Raise the rear of the vehicle, and support it with safety stands in the proper locations.
  1. Remove the rear wheel.
  1. Release the parking brake lever fully.
  1. Remove the brake hose mounting bolt (A).
  1. Remove the brake caliper bracket mounting bolts (B), and remove the caliper assembly (C) from the knuckle. To prevent damage to the caliper assembly or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage. Do not twist the brake hose excessively.
    NOTE: Make sure the plates (D) are in position on reassembly, if they are removed.