Wheel Bolt Replacement
Rear
  1. Raise the vehicle, and support it with safety stands in the proper locations.
  1. Remove the brake disc:
    • Rear disc brake type.
    • Rear drum in disc brake type.
  1. Separate the wheel bolt (A) from the hub (B) using the ball joint remover (C), and keep the jaw (D) of ball joint remover vertical against the wheel bolt.
    NOTE:
    • If the angle of the remover against the wheel bolt is not square, readjust the ball joint remover by turning the head (E) of the adjusting bolt (F).
    • Before installing the new wheel bolt, clean the mating surfaces on the bolt and the hub.