Front Knuckle/Hub/Wheel Bearing Replacement

Exploded View
Special Tools Required

Ball joint remover, 28 mm
 07MAC-SL00201

Hub dis/assembly tool, 42 mm
 07GAF-SD40100

Bearing driver attachment, 72 x 75 mm
 07746-0010600

Driver handle, 15 x 135 L
 07749-0010000

Bearing driver attachment, 78 x 90 mm
  07GAD-SD40101

Support base, 73 x 78/82.6 mm
 07965-SD90100
Knuckle/Hub Replacement
  1. Raise the front of the vehicle, and support it with safety stands in the proper locations.
  1. Remove the wheel nuts and the front wheel.