Service Reminder System General Information - for applicable EU countries
Service Information
  1. The service reminder information display is shown on the multi-information display. When the ignition switch is ON (II), and the remaining days are more than 30 days, the display shows a warning symbol (A), the maintenance item (B), and remaining distance or days (C). To see the service reminder information display, turn the ignition switch to ON (II), then push and release the SEL/RESET switch until the service reminder information display appears.
NOTE:
  • Depending on the customer's driving condition, the remaining distance may not be always in agreement with the mileage in the odometer.
  • The system switches the display between the remaining distance and the remaining days, depending on customer's driving conditions. If the customer does not drive frequently, generally the display shows the remaining days. The system monitors the driving condition, and records the elapsed time and distance from the last maintenance. Based on this data, the system assumes the future driving conditions and selects the appropriate service reminder information display.