24

BRN/WHT

VCC5 (SENSOR VOLTAGE)

Provides sensor reference voltage

With ignition switch ON (II): about 5.0 V

25

RED/BLK

VCC4 (SENSOR VOLTAGE)

Provides sensor reference voltage

With ignition switch ON (II): about 5.0 V

  27 ^*1

PNK

SLS (SHIFT LOCK SOLENOID)

Drives shift lock solenoid

With ignition switch ON (II), in the P, brake pedal pressed, and accelerator released: about 0 V

  27 ^*3

WHT/BLK

RVS (REVERSE LOCK SOLENOID VALVE)

Drives reverse lock solenoid valve

With ignition switch ON (II): battery voltage

28

BLU/RED

NEP (ENGINE SPEED PULSE)

Outputs engine speed pulse

With engine running: pulses

29

BLU

VSSOUT (VEHICLE SPEED SIGNAL OUTPUT)

Sends vehicle speed sensor signal

Depending on vehicle speed: pulses

31

ORN

SCS (SERVICE CHECK SIGNAL)

Detects service check signal

With service check signal shorted using the HDS: about 0 V

With service check signal opened: about 5.0 V

  32 ^*1

LT BLU

SUPP (PADDLE SHIFTER+ (UPSHIFT SWITCH))

Detects (paddle shifter+ (upshift switch)) signal

With paddle shifter+ (upshift switch) pulled:

With paddle shifter+ (upshift switch) released: about 5.0 V

33

YEL/RED

ECT2 (ENGINE COOLANT TEMPERATURE (ECT) SENSOR 2)

Detects ECT sensor 2 signal

With ignition switch ON (II): about 0.1−4.8 V (depending on engine coolant temperature)

34

GRN

SG5 (SENSOR GROUND)

Sensor ground

Less than 0.5 V at all times

35

BLU/RED

SG4 (SENSOR GROUND)

Sensor ground

Less than 0.5 V at all times

36

WHT

CANH (CAN COMMUNICATION SIGNAL HIGH)

Sends communication signal

With ignition switch ON (II): pulses (about 2.5 V)

37

RED

CANL (CAN COMMUNICATION SIGNAL LOW)

Sends communication signal

With ignition switch ON (II): pulses (about 2.5 V)

*1:

A/T

*3:

M/T