|
Terminal Number
|
Wire Color
|
Terminal Name
|
Description
|
Signal
|
|---|---|---|---|---|
|
B21
|
GRN
|
SH C (SHIFT SOLENOID VALVE C)
|
Drives shift solenoid valve C
|
With engine running:
In D and S (2nd, 3rd, 4th, and 5th gears): Battery voltage
In P, R, N, D and S (1st gear): About 0 V
|
|
B22
|
YEL/GRN
|
ATP D (TRANSMISSION RANGE SWITCH D)
|
Detects transmission range switch D position signal
|
In D: About 0 V
In any position other than D: Battery voltage
|
|
B23
|
RED/WHT
|
ATP RVS (TRANSMISSION RANGE SWITCH RVS)
|
Detects transmission range switch R position signal
|
In R: About 0 V
In any position other than R: Battery voltage
|
|
B25
|
YEL
|
SH E (SHIFT SOLENOID VALVE E)
|
Drives shift solenoid valve E
|
With engine running:
In P and R: Battery voltage
In N, D and S (1st gear): About 0 V
|
|
B26
|
BLU/YEL
|
LS C (A/T CLUTCH PRESSURE CONTROL SOLENOID VALVE C)
|
Drives A/T clutch pressure control solenoid valve C
|
With ignition switch ON (II): Current controlled
|
|
B27
|
GRN/RED
|
SH D (SHIFT SOLENOID VALVE D)
|
Drives shift solenoid valve D
|
With engine running:
In P and R: Battery voltage
In N, D and S (1st gear): About 0 V
|
|
B28
|
RED/YEL
|
ATFT (ATF TEMPERATURE SENSOR)
|
Detects ATF temperature sensor signal
|
With ignition switch ON (II): About 0.2−4.8 V depending on ATF temperature
With ignition switch LOCK (0): About 0 V
|
|
B29
|
BLU/YEL
|
ATP FWD (TRANSMISSION RANGE SWITCH FWD)
|
Detects transmission range switch D and S positions signal
|
In D and S: About 0 V
In any position other than D and S: Battery voltage
|
|
B34
|
GRN/BLK
|
SG2 (SENSOR GROUND)
|
Sensor ground
|
Less than 0.5 V at all times
|
|
B38
|
BLK/WHT
|
NC (OUTPUT SHAFT (COUNTERSHAFT) SPEED SENSOR)
|
Detects output shaft (countershaft) speed sensor signal
|
With ignition switch ON (II): About 0 V or about 5.0 V
With driving: About 2.5 V (pulses)
|
|
B40
|
BRN
|
LS B (A/T CLUTCH PRESSURE CONTROL SOLENOID VALVE B)
|
Drives A/T clutch pressure control solenoid valve B
|
With ignition switch ON (II): Current controlled
|
|
B48
|
RED/BLK
|
LS A (A/T CLUTCH PRESSURE CONTROL SOLENOID VALVE A)
|
Drives A/T clutch pressure control solenoid valve A
|
With ignition switch ON (II): Current controlled
|
|
Terminal Number
|
Wire Color
|
Terminal Name
|
Description
|
Signal
|
|---|---|---|---|---|
|
C10
|
BLK/RED
|
IG1 (IGNITION SIGNAL)
|
Detects ignition switch signal
|
With ignition switch ON (II): Battery voltage
With ignition switch LOCK (0): About 0 V
|
|
C13
|
YEL/RED
|
VCC1 (SENSOR VOLTAGE)
|
Provides sensor voltage
|
With ignition switch ON (II): About 5.0 V
With ignition switch LOCK (0): About 0 V
|
|
C14
|
GRN/WHT
|
SG1 (SENSOR GROUND)
|
Sensor ground
|
Less than 0.5 V at all times
|
|
C44
|
BRN/YEL
|
LG1 (LOGIC GROUND)
|
Ground circuit for PCM
|
Less than 0.5 V at all times
|
|
C48
|
BRN/YEL
|
LG2 (LOGIC GROUND)
|
Ground circuit for PCM
|
Less than 0.5 V at all times
|