Maintenance Schedule for Severe Conditions - for Service Reminder System non-applicable EU countries
150,000miles(12year)
Follow the severe conditions maintenance schedule if the customer's vehicle is driven MAINLY under one or more of the following conditions:
-
Driving less than 8 km (5 miles) per trip or, in freezing temperatures, driving less than 16 km (10 miles) per trip.
-
Driving in extremely hot over 35 °C (95 °F) conditions.
-
Extensive idling, or long periods of stop-and-go driving.
-
Towing trailer, driving with a car-top carrier, or driving in mountainous conditions.
-
Driving on muddy, dusty, or de-iced roads.
NOTE: If the vehicle is driven OCCASIONALLY under severe conditions, follow the normal conditions maintenance schedule.
Service at the indicated distance or time whichever comes first
|
Replace engine oil filter
|
|
|
|
|
|
|
|
Replace fuel filter
|
|
|
|
|
|
|
|
Inspect drive belt
|
|
|
|
|
Look for cracks and damage, then check the position of the drive belt auto-tensioner indicator.
|
|
|
|
|
Inspect idle speed
|
|
|
|
|
|
|
|
|
Check the parking brake operation.
|
|
|
|
|
|
When the vehicle is driven mostly in areas that have high concentrations of dust, pollen, or soot in the air, replace the filter whenever airflow from the heating and air conditioning system is less than normal.
|
|
|
|
|
|
Check the position of the headlights.
|
|
|
|
|
Test drive (noise, stability, dashboard operation)
|
|
|
|
|
|
Check expiration date for TRK (Temporary Repair Kit) bottle (if equipped)
|
|
|
|
|
Visually inspect the following items:
|
|
|
|
Check for correct installation and position, check for cracks, deterioration, rust, and leaks.
|
|
|
Check tightness of screws, nuts, and joints. If necessary, retighten.
|
|
|
|
|
Check the master cylinder and VSA modulator-control unit and leakage.
|
|
|
|
|
All fluid levels and condition of fluids
|
|
|
Check levels and check for leaks. If necessary, add.
|
|
|
|
|
|
|
Exhaust system
|
|
|
|
|
Check the exhaust pipe and muffler for damage, leaks, and tightness.
|
|
|
|
|
Fuel lines
|
|
|
|
|
|
Check fuel lines for loose connections, cracks, and deterioration.
|
|
|
Retighten loose connections and replace any damaged parts.
|
|
|
|
|
|
Tyre condition
|
|
|
|
Replace every 10,000 km (6,250 miles) or 6 months
|
|
Replace engine oil
|
|
|
|
|
|
Every 30,000 km (18,750 miles)
|
|
Replace air cleaner element
|
|
|
|
|
Use normal conditions except in dusty conditions.
|
|
|
Every 100,000 km (62,500 miles)
|
|
Inspect valve clearance
|
|
|
|
|
|
Every 120,000 km (75,000 miles)
|
|
Replace spark plugs
|
|
|
|
|
|
At 200,000 km (120,000 miles) or 10 years, then every 100,000 km (60,000 miles) or 5 years
|
|
Replace engine coolant
|
|
|
|
|
Use genuine Honda All Season Antifreeze/Coolant Type 2.
|
|
|
Every 60,000 km (37,500 miles) or 4 years
At 60,000 km (37,500 miles) or 4 years, then every 40,000 km (25,000 miles) or 2 years
|
|
|
Use genuine Honda ATF-Z1.
|
|
|
Every 10,000 km (6,250 miles) or 6 months
|
|
|
|
Check the brake pad and disc thickness. Check for damage or cracks.
|
|
|
Check the calipers for damage, leaks, and tightness.
|
|
|
|
|
Visually inspect the following items:
|
|
|
|
|
|
Check rack grease and steering linkage.
|
|
|
Check the boot for damage and leaking grease.
|
|
|
|
|
|
|
|
Check the bolts for tightness.
|
|
|
Check all dust covers for deterioration and damage.
|
|
|
|
|
|
|
|
Check the boot and boot band for cracks.
|
|
|
Check rack grease.
|
|
|
|
Every 3 years
|
|
|
|
Use only DOT 3 or DOT 4 brake fluid. We recommend genuine Honda Brake Fluid.
|
|
|
Check the brake fluid level is between upper and lower marks on the reservoir.
|
|
|
|
Every year
|
|
Inspect vehicle corrosion: refer to the Body Repair Manual
|
|
|
|
External Paintwork and Panel Corrosion Check
|
|
|
Under Body Corrosion Check
|
|
|
|