|
DTC P0406:
EGR Valve Position Sensor Circuit High Voltage
-
Turn the ignition switch to ON (II).
-
Check the EGR VLS in the DATA LIST with the HDS.
|
Is 4.88 V or more indicated?
|
|
YES
|
-
|
|
|
NO
|
-
|
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the EGR valve and the ECM/PCM.■
|
-
Turn the ignition switch to LOCK (0).
-
Disconnect the EGR valve 6P connector.
-
Turn the ignition switch to ON (II).
-
Measure the voltage between EGR valve 6P connector terminals No. 2 and No. 3.
-
Turn the ignition switch to LOCK (0).
-
Jump the SCS line with the HDS.
-
Disconnect ECM/PCM connector B (44P).
|