DTC Troubleshooting: Ex-11

DTC Ex-11 (''x'' can be 0 thru 9 or A thru F):
Control Operation Recorded
NOTE:
  1. Turn the ignition switch to ON (II), then wait for 10 seconds.
Are DTC Ex-11 and Fx-11 indicated?
YES -
NO -
Go to Step 4 .
  1. Turn the ignition switch to ON (II), then wait for 10 seconds.
Is DTC Ex-11 indicated?
YES -
NO -
Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, troubleshoot the DTC.