|
DTC 73-15:
Short to Power in the Left Side E-pretensioner Motor
-
-
Turn the ignition switch to LOCK (0), and wait for 10 seconds.
-
Turn the ignition switch to ON (II), and wait for 10 seconds.
-
-
Turn the ignition switch to LOCK (0).
-
-
Turn the ignition switch to ON (II).
-
Measure the voltage between No. 1 terminal of the left engine compartment subharness 5P connector (LHD models) or E-pretensioner subharness 5P connector (RHD models) and body ground, and between the No. 2 terminal and body ground. There should be less than 1.0 V.
|
Is the voltage as specified?
|
|
YES
|
-
|
|
|
NO
|
-
|
Open in the left engine compartment subharness (LHD models), E-pretensioner subharness (RHD models), left side wire harness or left engine compartment wire harness; replace the faulty harness.■
|
|