DTC Troubleshooting: B10A2
DTC B10A2:
 Driver's MICU (EEPROM) Error
  1. Clear the DTCs with the HDS.
  1. Turn the ignition switch to LOCK (0) and then back to ON (II).
  1. Wait for 6 seconds or more.
  1. Check for DTCs with the HDS.
Is DTC B10A2 indicated?
YES -
Faulty driver's MICU, replace the driver's under-dash fuse/relay box.■
NO -
Intermittent failure, the system is OK at this time.■