DTC Troubleshooting: 2706
DTC 2706:
Gyro Diag: ECU Temp XX °C
NOTE:
Before you troubleshoot,
make sure to follow the general troubleshooting information.
Do this test only when the trunk temperature is between −20 °C (−4 °F) to 70 °C (158 °F).
Clear the hard error code.
Turn the ignition switch to LOCK (0), and then back to ON (II).
Check for the hard error code.
Is DTC 2706 Indicated?
YES
-
Replace the navigation unit.
■
NO
-
Intermittent failure, the system is OK at this time.■