DTC Troubleshooting: 2701
DTC 2701:
 GPS Diag: Antenna
NOTE:
  1. Turn the ignition switch to LOCK (0), and then back to ON (II).
  1. Select the System Links, then select the GPS Ant.
Is Antenna OK indicated?
YES -
Intermittent failure, the system is OK at this time.■
NO -
Go to Step 5 .
  1. Turn the ignition switch to LOCK (0).
  1. Check for poor connections at navigation unit connector E (2P).
Is the connection OK?
YES -
NO -
Repair poor connection.■