DTC Troubleshooting: 2609
DTC 2609:
VRAM Diag
NOTE: Before you troubleshoot,
make sure to follow the general troubleshooting information.
Clear the hard error code.
Turn the ignition switch to LOCK (0), and then back to ON (II).
Go into the Diagnostic Menu and select the Self-Diagnosis Mode in the Select Diagnosis items menu.
Select the System Links, then select the ECU Info.
Is V-RAM OK indicated?
YES
-
Intermittent failure, the system is OK at this time.■
NO
-
Replace the navigation unit.
■