DTC Troubleshooting: 1307
DTC 1307:
DVD Read Error
NOTE:
Check the vehicle battery condition first.
Before you troubleshoot, make sure to follow the general troubleshooting information.
Turn the ignition switch to ON (II).
Is there a DVD error message?
YES
-
Go to DVD screen error messages.
NO
-
Go to
Step 2
.
Clear the hard error code.
Turn the ignition switch to LOCK (0), and then back to ON (II).
Check for the hard error code.
Is DTC 1307 indicated?
YES
-
Replace the navigation unit.
■
NO
-
Intermittent failure, the system is OK at this time.■