DTC Troubleshooting: 1306
DTC 1306:
 Vehicle Speed Pulse
NOTE:
  1. Turn the ignition switch to LOCK (0), and then start the engine.
Is DTC 1306 indicated?
YES -
Go to Step 4 .
NO -
Intermittent failure, the system is OK at this time.■
  1. Drive the vehicle and watch the VSP signal.
Does the VSP signal change from [0] to [1] as you drive?
YES -
NO -
Do the symptom troubleshooting for Vehicle position icon constantly leaves road, moves erratically or is very far from actual position. ■