|
DTC 1302:
GPS Receiver Error 1
NOTE:
-
Check the vehicle battery condition first.
-
-
Make sure the vehicle is parked outside and away from buildings.
-
Aftermarket electronic devices located near the navigation unit or GPS antenna can potentially interfere with the operation of the navigation system.
-
-
Turn the ignition switch to LOCK (0), and then back to ON (II).
-
|
YES
|
-
|
|
|
NO
|
-
|
Intermittent failure, the system is OK at this time.■
|
-
Turn the ignition switch to LOCK (0).
-
Check for poor connections or loose terminals at the navigation unit connector E (2P).
-
-
Turn the ignition switch to LOCK (0), and then back to ON (II).
-
Check for the hard error code.
|
YES
|
-
|
|
|
NO
|
-
|
Repair poor connections or loose terminals at the navigation unit, and then reconnect all connectors.■
|
|
|