DTC Troubleshooting: 1301

DTC 1301:
 GPS Antenna Error
NOTE:
  1. Turn the ignition switch to LOCK (0), and then back to ON (II).
Is DTC 1301 indicated?
YES -
Go to Step 4 .
NO -
Intermittent failure, the system is OK at this time.■
  1. Turn the ignition switch to LOCK (0).
  1. Check for poor connections or loose terminals at the navigation unit connector E (2P).
  1. Turn the ignition switch to LOCK (0), and then back to ON (II).
  1. Check for the hard error code.
Is DTC 1301 indicated?
YES -
NO -
Intermittent failure, the system is OK at this time.■