DTC Troubleshooting: 6
LKAS Camera DTC 6:
 Temperature Monitoring Circuit Malfunction
  1. Turn the ignition switch to LOCK (0), then turn it to ON (II).
  1. Watch the LKAS indicator.
Does the LKAS indicator come on?
YES -
Go to Step 4 .
NO -
Go to Step 5 .
Is DTC 6 indicated?
YES -
Check for loose terminals in the LKAS camera 10P connector and LKAS control unit 26P connector. If all connections are OK, replace the LKAS camera and LKAS control unit as a set.
NO -
Troubleshoot the indicated DTC(s).■
Is DTC 7 or 8 indicated?
YES -
Do the troubleshoot for DTC 7 or 8.■
NO -
Intermittent failure, the system is OK at this time.■