DTC Troubleshooting: 1, 2, 3
LKAS Camera DTC 1:
 LKAS Camera Malfunction
LKAS Camera DTC 2:
 Image Processing Circuit Malfunction
LKAS Camera DTC 3:
 EEPROM Circuit Malfunction
  1. Turn the ignition switch to LOCK (0), then turn it to ON (II).
  1. Watch the LKAS indicator.
Does the LKAS indicator come on?
YES -
Go to Step 4 .
NO -
Go to Step 5 .
Is DTC 1, 2, or 3 indicated?
YES -
Check for loose terminals in the LKAS camera 10P connectors, and repair if necessary. If all connections are OK, replace the LKAS camera. ■
NO -
Go to the indicated DTCs troubleshooting.■
Is DTC 7 or 8 indicated?
YES -
Do the troubleshoot for DTC 7 or 8.■
NO -
Intermittent failure, the system is OK at this time.■