|
DTC B2482:
Combination Light Switch Signal Error
-
Clear the DTCs with the HDS.
-
Turn the ignition switch to LOCK (0) and then back to ON (II).
-
Turn the headlight switch ON and then back OFF.
-
Check for DTCs with the HDS.
|
YES
|
-
|
|
|
NO
|
-
|
Intermittent failure, the system is OK at this time.■
|
-
Check for DTCs with the HDS.
|
Are any other DTCs indicated?
|
|
YES
|
-
|
Go to the indicated DTC's troubleshooting.■
|
|
NO
|
-
|
Replace the
headlight leveling control unit
.■
|
|