|
NOTE: Take care not to tear the seams or damage the seat covers.
-
-
Release all the hook strips (A), and fold back the seat side bolster cover (B), and release all the staples (C) fastening the cover.
|
Staple:
|
Height 5 mm (0.2 in.)
|
|
|
Width 10 mm (0.39 in.)
|
-
Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a side bolster cover, make sure the material is stretched evenly over the pad before securing the hook strips and the staples.
-
Fasten the cover with new staples securely.
|
