Front Door Weatherstrip Replacement
NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the door.
  • Take care not to damage the front upper corner hook and the rear upper corner clip (black) in the weatherstrip because the hook and the clip are not able to replace with new ones.
  • Use a clip remover to remove the clips.
  1. At the front pillar, remove the door checker mounting bolt (A).
  1. Detach the clips (B, C, D) and hook (E), and release the door weatherstrip (F) from the holder (G) of the door sash, then remove the weatherstrip.
  1. Install the weatherstrip in the reverse order of removal, and note these items:
    • If the clips are damaged or stress-whitened, replace them with new ones.
    • Make sure the weatherstrip is installed in the holder securely.
    • Apply medium strength liquid thread lock to the door checker mounting bolt before installation.