ACC Combination Switch and Distance/LKAS Switch Removal/Installation
-
-
Remove the lids (A) from the steering wheel.
|
|
-
Remove the screws (A) from the steering wheel.
|
|
-
Disconnect the ACC combination switch 12P connector (A) and audio remote switch 12P connector (B).
-
Release the hook (C) and pull up the pins (D) by pulling the steering wheel, then disconnect the distance/LKAS OFF switch 7P connector (E) and HFT switch 7P connector (F).
|
|
-
Remove the screws, then remove the distance/LKAS switch (A) from the steering wheel trim (B).
|
|
-
Remove the screw and release the hook, then remove the ACC combination switch (A) from the steering wheel trim (B).
-
Install the ACC combination switch in the reverse order of removal.
|
|
