|
Adaptive cruise control (ACC) indicator (orange) does not come on
-
Turn the ignition switch to ON (II).
-
Watch the following indicators in the gauge control module:
|
Do the indicators come on?
|
-
Turn the ignition switch to LOCK (0).
-
Check the No. 2 (7.5 A) fuse in the driver's under-dash fuse/relay box.
|
YES
|
-
|
|
|
NO
|
-
|
Replace the fuse, then recheck.■
|
-
Disconnect the gauge control module 32P connector.
-
Turn the ignition switch to ON (II).
-
Check for voltage between the gauge control module 32P connector No. 15 terminal and body ground.
|
Is there battery voltage?
|
|
YES
|
-
|
|
|
NO
|
-
|
Repair an open in the wire between the gauge control module and the No. 5 (7.5 A) fuse in the driver's under-dash fuse/relay box, if the wire is OK, replace the driver's under-dash fuse/relay box.■
|
|