Driveshaft Dynamic Damper Replacement
  1. Remove the dynamic damper (A).
  1. Install the new dynamic damper.
    NOTE: Be careful not to swap the dynamic dampers. Check the type of dynamic damper at its shape.
    Model
    Left/Right Driveshaft
    Dynamic Damper (A) Type
    R20A3 engine model
    M/T
    Left
    2
    Right
    1
    A/T
    Left
    1
    Right
    1
    K24Z3 engine model
    M/T
    Left
    2
    Right
    1
    A/T
    Left
    1
    Right
    2

Dynamic damper type 1
Dynamic damper type 2
  1. Adjust the specified distance (A) between the outboard joint side and the dynamic damper edge.
    NOTE: Check the type of dynamic damper at its shape.
Model
Left/Right Driveshaft
Dynamic Damper Type
Specified Distance (A)
R20A3 engine model
M/T
Left
2
295.5−300.5 mm (11.63−11.83 in.)
Right
1
A/T
Left
1
295.5−300.5 mm (11.63−11.83 in.)
Right
1
K24Z3 engine model
M/T
Left
2
295.5−300.5 mm (11.63−11.83 in.)
Right
1
A/T
Left
1
298.5−303.5 mm (11.75−11.95 in.)
Right
2
292.5−297.5 mm (11.52−11.71 in.)

Dynamic damper type 1
Dynamic damper type 2