-
-
Remove the rear wheels.
-
-
Remove the flange bolts (A) and the bushing holders (B), then remove the bushings (C) and the stabilizer bar (D).
NOTE: During installation, align the paint marks (E) on the stabilizer bar with the side of the bushings.
-
Install the stabilizer bar in the reverse order of removal, and note these items:
-
Note the right and left direction of the stabilizer bar.
-
Note the direction of installation for the bushing.
-
-
Before installing the wheel, clean the mating surfaces of the brake disc or the brake disc/drum and the inside of the wheel.
-
|
|
