Senator-B, 3.0i 24V ,, 2969 cc, 1989-93, Engine Code C30SE,

Ignition data

Senator-B, 3.0i 24V
Ignition system type: Map-i
Ignition coil make/type: Bo/0 221 122 508
Supply voltage: 11 - Volts without ballast resistor
Primary resistance: 0.65-0.79 Ohms
Secondary resistance: 6900-8500 Ohms
Distributor make/type: Bo/0 237 503 009
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: n / a Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 8-12/570 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: Pulley
Firing Order: 1-5-3-6-2-4
Spark plug make: Bosch
Spark plug type: FR7DTC
Electrode gap: 0.7-0.8 mm

Fuel System

Senator-B, 3.0i 24V
Fuel type: U Cat
Fuel pump type/pressure: Elec/2.5 bar
Engine idle speed: 570-730 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 0.4 Max Vol %

Engine Data

Senator-B, 3.0i 24V
Valve clearance - inlet: Hyd
Valve clearance - exhaust: Hyd
Compression pressure: n / a bar
Oil pressure: 4.5-5.0/2000 bar/eng/rpm
Radiator pressure cap: 1.2-1.5 bar/type
Drive belt 1 - size: 6K 1460 mm/type
Drive belt 2 - size: 6K 2230 mm/type

Electrical System

Senator-B, 3.0i 24V
Alternator output: 90/6000 Amps/eng/rpm
Regulated output: 13.8-14.8 Volts
Battery: 12/66 V/Ah
Starter motor make/type: Bo/0 001 108 080

Other data

Senator-B, 3.0i 24V
Clutch operation type: Cable
Clutch adjustment: 155/P.Travel mm
Cambelt failure: n / a
Cambelt Part Number: n / a
Tyre pressures: 2.2(31)f 2.2(31)r bar (psi)