Camry GLi, 2.0 ,, 1998 cc, 1986-91, ,Engine Code 3SFE

Ignition data

Camry GLi, 2.0
Ignition system type: El-ecu
Ignition coil make/type: n / a
Supply voltage: 11 - Volts without ballast resistor
Primary resistance: 0.38-0.46 Ohms
Secondary resistance: 7700-10400 Ohms
Distributor make/type: Den/-
Contact breaker gap/air: 0.2-0.4 mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 10/700 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 10/700 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: O/S/F
Firing Order: 1-3-4-2
Spark plug make: NGK
Spark plug type: BCPR6EY11
Electrode gap: 1.1 mm

Fuel System

Camry GLi, 2.0
Fuel type: L/U
Fuel pump type/pressure: Elec/2.3-2.7 bar
Engine idle speed: 700
50 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 1.5
0.5 Vol %

Engine Data

Camry GLi, 2.0
Valve clearance - inlet: 0.19-0.29 c mm (cold)
Valve clearance - exhaust: 0.28-0.38 c mm (cold)
Compression pressure: 10-13 bar
Oil pressure: 2.5-5.0/3000 bar/eng/rpm
Radiator pressure cap: 0.75-1.05 bar/type
Drive belt 1 - size: PV/1000 KIB100 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Camry GLi, 2.0
Alternator output: 70/2500 Amps/eng/rpm
Regulated output: 13.5-15.1 Volts
Battery: 12/60 V/Ah
Starter motor make/type: Den/1.4 kW

Other data

Camry GLi, 2.0
Clutch operation type: Hyd
Clutch adjustment: 5-15/Pedal mm
Cambelt failure: Damage
Cambelt Part Number: 1356874012
Tyre pressures: 2.0(28)f 2.0(28)r bar (psi)