Marbella, 850 ,, 843 cc, 1988-91, Engine Code 08NCA,

Ignition data

Marbella, 850
Ignition system type: CB
Ignition coil make/type: Ma/BE200B
Supply voltage: 11 - Volts without ballast resistor
Primary resistance: 3.0-3.3 Ohms
Secondary resistance: 8460-10340 Ohms
Distributor make/type: Ma/4/70
Contact breaker gap/air: 0.4 mm
Dwell angle: 55 Deg
Ignition Timing - unleaded: 10/850 +vac Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 10/850 +vac Deg eng/rpm (without vacuum)
Timing mark location: Flywheel
No 1 plug location: O/S/F
Firing Order: 1-3-4-2
Spark plug make: Champion
Spark plug type: RN9YC
Electrode gap: 0.7 mm

Fuel System

Marbella, 850
Fuel type: L/U
Fuel pump type/pressure: Mech/0.2-0.3 bar
Engine idle speed: 850 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 3.0 Vol %

Engine Data

Marbella, 850
Valve clearance - inlet: 0.15 c mm (cold)
Valve clearance - exhaust: 0.20 c mm (cold)
Compression pressure: n / a bar
Oil pressure: 3-4/5000 bar/eng/rpm
Radiator pressure cap: 0.98 bar/type
Drive belt 1 - size: 9.5x813 KDB813 mm/type
Drive belt 2 - size: n / a mm/type
Electrical System

Marbella, 850
Alternator output: 45/6000 Amps/eng/rpm
Regulated output: 13.6-14.0 Volts
Battery: 12/32 V/Ah
Starter motor make/type: Lu/LRS192

Other data

Marbella, 850
Clutch operation type: Cable
Clutch adjustment: S/Adj. mm
Cambelt failure: n / a
Cambelt Part Number: n / a
Tyre pressures: 1.7(24)f 1.9(27)r bar (psi)