Proton, 1.3 12V ,, 1298 cc, 1991-, Engine Code 4G13-2,

Ignition data

Proton, 1.3 12V
Ignition system type: El-i
Ignition coil make/type: Mit/-
Supply voltage: 11 - Volts without ballast resistor
Primary resistance: 0.9-1.2 Ohms
Secondary resistance: 20000-29000 Ohms
Distributor make/type: Mit/-
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 3
2/800 +vac Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 3
2/800 +vac Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: N/S/F
Firing Order: 1-3-4-2
Spark plug make: Champion
Spark plug type: RN9YC
Electrode gap: 0.7-0.8 mm

Engine Data

Proton, 1.3 12V
Valve clearance - inlet: 0.15 h mm (hot)
Valve clearance - exhaust: 0.25 h mm (hot)
Compression pressure: 9.8 Min bar
Oil pressure: 0.8 Min/800 bar/eng/rpm
Radiator pressure cap: 0.76-1.03 bar/type
Drive belt 1 - size: PV/4x875 KIB875 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Proton, 1.3 12V
Alternator output: 60/2000 Amps/eng/rpm
Regulated output: 14.4
0.5 Volts
Battery: 12/60 V/Ah
Starter motor make/type: Mit/0.9 kW

Other data

Proton, 1.3 12V
Clutch operation type: Cable
Clutch adjustment: 20-30/Pedal mm
Cambelt failure: Damage
Cambelt Part Number: MD145813
Tyre pressures: 1.7(24)f 1.7(24)r bar (psi)