605, 2.0i ,, 1998 cc, 1991-, Engine Code XU10J2K(R6A),

Ignition data

605, 2.0i
Ignition system type: El-ecu/DI
Ignition coil make/type: Ma/-
Supply voltage: 11 - Volts without ballast resistor
Primary resistance: 0.8 Ohms
Secondary resistance: n / a Ohms
Distributor make/type: Ma/-
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: n / a Deg eng/rpm (without vacuum)
Ignition Timing - leaded: n / a Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: N/S/F
Firing Order: 1-3-4-2
Spark plug make: Champion
Spark plug type: C9YCX
Electrode gap: 0.8 mm

Fuel System

605, 2.0i
Fuel type: L/U
Fuel pump type/pressure: Elec/- bar
Engine idle speed: T850
50 rpm
Fast idle speed: n / a rpm
CO level at idle speed: T0.5 Max Vol

Engine Data

605, 2.0i
Valve clearance - inlet: 0.20 c mm (cold)
Valve clearance - exhaust: 0.40 c mm (cold)
Compression pressure: n / a bar
Oil pressure: 4.5/2000 bar/eng/rpm
Radiator pressure cap: 1.4 bar/type
Drive belt 1 - size: 9.5x1000 KDB101 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

605, 2.0i
Alternator output: 65/1820 Amps/eng/rpm
Regulated output: 13.8-14.8 Volts
Battery: 12/55 V/Ah
Starter motor make/type: Lu/M78R

Other data

605, 2.0i
Clutch operation type: Cable
Clutch adjustment: S/Adj. mm
Cambelt failure: Damage
Cambelt Part Number: 81648
Tyre pressures: 2.2(32)f 2.2(32)r bar (psi)