Cabstar, E20/F20 ,, 1982 cc, ,1978-82, Engine Code H20 ,

Ignition data

Cabstar, E20/F20
Ignition system type: CB
Ignition coil make/type: n / a
Supply voltage: n / a
Primary resistance: n / a Ohms
Secondary resistance: n / a Ohms
Distributor make/type: Mit/T3T12779
Contact breaker gap/air: 0.5 mm
Dwell angle: 49-55 Deg
Ignition Timing - unleaded: 5/650 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 5/650 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: Pulley
Firing Order: 1-3-4-2
Spark plug make: NGK
Spark plug type: BPR5ES
Electrode gap: 0.8 mm

Fuel System

Cabstar, E20/F20
Fuel type: L/U
Fuel pump type/pressure: Mech/0.24 bar
Engine idle speed: 650 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 1.5 Vol %

Engine Data

Cabstar, E20/F20
Valve clearance - inlet: 0.38 h mm (hot)
Valve clearance - exhaust: 0.38 h mm (hot)
Compression pressure: 10.8-11.8 bar
Oil pressure: 2.94-3.43/- bar/eng/rpm
Radiator pressure cap: 0.88 bar/type
Drive belt 1 - size: 10x960KDB960 mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Cabstar, E20/F20
Alternator output: 40/3000 Amps/eng/rpm
Regulated output: 13.8-14.8 Volts
Battery: 12/50 V/Ah
Starter motor make/type: Lu/LRS396

Other data

Cabstar, E20/F20
Clutch operation type: Hyd
Clutch adjustment: 1-5/Pedal mm
Cambelt failure: n / a
Cambelt Part Number: n / a
Tyre pressures: 3.5(50)f 5.2(74)r bar (psi)