Serena, 2.0i ,, 1998 cc, 1992-, , Engine Code SR20DE

Ignition data

Serena, 2.0i
Ignition system type: El-ecu
Ignition coil make/type: Hit/-
Supply voltage: 12 - Volts without ballast resistor
Primary resistance: 1.0 Ohms
Secondary resistance: 8000-12000 Ohms
Distributor make/type: Hit/-
Contact breaker gap/air: n / a mm
Dwell angle: n / a Deg
Ignition Timing - unleaded: 15
2/750 Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 15
2/750 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: Pulley
Firing Order: 1-3-4-2
Spark plug make: Champion
Spark plug type: RC9MCC
Electrode gap: 0.8 mm

Fuel System

Serena, 2.0i
Fuel type: U +Cat
Fuel pump type/pressure: Elec/2.45 bar
Engine idle speed: 800
50 rpm
Fast idle speed: n / a rpm
CO level at idle speed: 0.5
0.5 [Cat=1.0 Max] Vol %

Engine Data

Serena, 2.0i
Valve clearance - inlet: Hyd
Valve clearance - exhaust: Hyd
Compression pressure: 10.8-12.3 bar
Oil pressure: 3.1-3.9/3200 bar/eng/rpm
Radiator pressure cap: 0.78-0.98 bar/type
Drive belt 1 - size: n / a mm/type
Drive belt 2 - size: n / a mm/type

Electrical System

Serena, 2.0i
Alternator output: 63/2500 Amps/eng/rpm
Regulated output: 14.1-14.7 Volts
Battery: 12/65 V/Ah
Starter motor make/type: Mit/MIT60581

Other data

Serena, 2.0i
Clutch operation type: Hyd
Clutch adjustment: 1-3/Pedal mm
Cambelt failure: n / a
Cambelt Part Number: n / a
Tyre pressures: 2.0(28)f 26(37)r bar (psi)